//  ---------------------------------------------------------------------------
//  This file is part of reSID, a MOS6581 SID emulator engine.
//  Copyright (C) 2010  Dag Lem <resid@nimrod.no>
//
//  This program is free software; you can redistribute it and/or modify
//  it under the terms of the GNU General Public License as published by
//  the Free Software Foundation; either version 2 of the License, or
//  (at your option) any later version.
//
//  This program is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//  GNU General Public License for more details.
//
//  You should have received a copy of the GNU General Public License
//  along with this program; if not, write to the Free Software
//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
//  ---------------------------------------------------------------------------

#ifndef RESID_ENVELOPE_H
#define RESID_ENVELOPE_H

#include "resid-config.h"

namespace reSID
{

// ----------------------------------------------------------------------------
// A 15 bit counter is used to implement the envelope rates, in effect
// dividing the clock to the envelope counter by the currently selected rate
// period.
// In addition, another counter is used to implement the exponential envelope
// decay, in effect further dividing the clock to the envelope counter.
// The period of this counter is set to 1, 2, 4, 8, 16, 30 at the envelope
// counter values 255, 93, 54, 26, 14, 6, respectively.
// ----------------------------------------------------------------------------
class EnvelopeGenerator
{
public:
  EnvelopeGenerator();

  enum State { ATTACK, DECAY_SUSTAIN, RELEASE, FREEZED };

  void set_chip_model(chip_model model);

  void clock();
  void clock(cycle_count delta_t);
  void reset();

  void writeCONTROL_REG(reg8);
  void writeATTACK_DECAY(reg8);
  void writeSUSTAIN_RELEASE(reg8);
  reg8 readENV();

  // 8-bit envelope output.
  short output();

protected:
  void set_exponential_counter();

  void state_change();

  reg16 rate_counter;
  reg16 rate_period;
  reg8 exponential_counter;
  reg8 exponential_counter_period;
  reg8 new_exponential_counter_period;
  reg8 envelope_counter;
  reg8 env3;
  // Emulation of pipeline delay for envelope decrement.
  cycle_count envelope_pipeline;
  cycle_count exponential_pipeline;
  cycle_count state_pipeline;
  bool hold_zero;
  bool reset_rate_counter;

  reg4 attack;
  reg4 decay;
  reg4 sustain;
  reg4 release;

  reg8 gate;

  State state;
  State next_state;

  chip_model sid_model;

  // Lookup table to convert from attack, decay, or release value to rate
  // counter period.
  static reg16 rate_counter_period[];

  // The 16 selectable sustain levels.
  static reg8 sustain_level[];

  // DAC lookup tables.
  static unsigned short model_dac[2][1 << 8];

friend class SID;
};


// ----------------------------------------------------------------------------
// Inline functions.
// The following functions are defined inline because they are called every
// time a sample is calculated.
// ----------------------------------------------------------------------------

#if RESID_INLINING || defined(RESID_ENVELOPE_CC)

// ----------------------------------------------------------------------------
// SID clocking - 1 cycle.
// ----------------------------------------------------------------------------
RESID_INLINE
void EnvelopeGenerator::clock()
{
  // The ENV3 value is sampled at the first phase of the clock
  env3 = envelope_counter;

  if (unlikely(state_pipeline)) {
    state_change();
  }

  // If the exponential counter period != 1, the envelope decrement is delayed
  // 1 cycle. This is only modeled for single cycle clocking.
  if (unlikely(envelope_pipeline != 0) && (--envelope_pipeline == 0)) {
    if (likely(!hold_zero)) {
      if (state == ATTACK) {
        ++envelope_counter &= 0xff;
        if (unlikely(envelope_counter == 0xff)) {
            state = DECAY_SUSTAIN;
            rate_period = rate_counter_period[decay];
        }
      }
      else if ((state == DECAY_SUSTAIN) || (state == RELEASE)) {
        --envelope_counter &= 0xff;
      }

      set_exponential_counter();
    }
  }

  if (unlikely(exponential_pipeline != 0) && (--exponential_pipeline == 0)) {
    exponential_counter = 0;

    if (((state == DECAY_SUSTAIN) && (envelope_counter != sustain_level[sustain]))
        || (state == RELEASE)) {
      // The envelope counter can flip from 0x00 to 0xff by changing state to
      // attack, then to release. The envelope counter will then continue
      // counting down in the release state.
      // This has been verified by sampling ENV3.

      envelope_pipeline = 1;
    }
  }
  else if (unlikely(reset_rate_counter)) {
    rate_counter = 0;
    reset_rate_counter = false;

    if (state == ATTACK) {
      // The first envelope step in the attack state also resets the exponential
      // counter. This has been verified by sampling ENV3.
      exponential_counter = 0; // NOTE this is actually delayed one cycle, not modeled

      // The envelope counter can flip from 0xff to 0x00 by changing state to
      // release, then to attack. The envelope counter is then frozen at
      // zero; to unlock this situation the state must be changed to release,
      // then to attack. This has been verified by sampling ENV3.

      envelope_pipeline = 2;
    }
    else {
      if ((!hold_zero) && ++exponential_counter == exponential_counter_period) {
        exponential_pipeline = exponential_counter_period != 1 ? 2 : 1;
      }
    }
  }

  // Check for ADSR delay bug.
  // If the rate counter comparison value is set below the current value of the
  // rate counter, the counter will continue counting up until it wraps around
  // to zero at 2^15 = 0x8000, and then count rate_period - 1 before the
  // envelope can finally be stepped.
  // This has been verified by sampling ENV3.
  //
  if (likely(rate_counter != rate_period)) {
    if (unlikely(++rate_counter & 0x8000)) {
      ++rate_counter &= 0x7fff;
    }
  }
  else
    reset_rate_counter = true;
}


// ----------------------------------------------------------------------------
// SID clocking - delta_t cycles.
// ----------------------------------------------------------------------------
RESID_INLINE
void EnvelopeGenerator::clock(cycle_count delta_t)
{
  // NB! Any pipelined envelope counter decrement from single cycle clocking
  // will be lost. It is not worth the trouble to flush the pipeline here.

  if (unlikely(state_pipeline)) {
    if (next_state == ATTACK) {
      state = ATTACK;
      hold_zero = false;
      rate_period = rate_counter_period[attack];
    } else if (next_state == RELEASE) {
      state = RELEASE;
      rate_period = rate_counter_period[release];
    } else if (next_state == FREEZED) {
      hold_zero = true;
    }
    state_pipeline = 0;
  }

  // Check for ADSR delay bug.
  // If the rate counter comparison value is set below the current value of the
  // rate counter, the counter will continue counting up until it wraps around
  // to zero at 2^15 = 0x8000, and then count rate_period - 1 before the
  // envelope can finally be stepped.
  // This has been verified by sampling ENV3.
  //

  // NB! This requires two's complement integer.
  int rate_step = rate_period - rate_counter;
  if (unlikely(rate_step <= 0)) {
    rate_step += 0x7fff;
  }

  while (delta_t) {
    if (delta_t < rate_step) {
      // likely (~65%)
      rate_counter += delta_t;
      if (unlikely(rate_counter & 0x8000)) {
        ++rate_counter &= 0x7fff;
      }
      return;
    }

    rate_counter = 0;
    delta_t -= rate_step;

    // The first envelope step in the attack state also resets the exponential
    // counter. This has been verified by sampling ENV3.
    //
    if (state == ATTACK || ++exponential_counter == exponential_counter_period) {
      // likely (~50%)
      exponential_counter = 0;

      // Check whether the envelope counter is frozen at zero.
      if (unlikely(hold_zero)) {
        rate_step = rate_period;
        continue;
      }

      switch (state) {
      case ATTACK:
        // The envelope counter can flip from 0xff to 0x00 by changing state to
        // release, then to attack. The envelope counter is then frozen at
        // zero; to unlock this situation the state must be changed to release,
        // then to attack. This has been verified by sampling ENV3.
        //
        ++envelope_counter &= 0xff;
        if (unlikely(envelope_counter == 0xff)) {
          state = DECAY_SUSTAIN;
          rate_period = rate_counter_period[decay];
        }
        break;
      case DECAY_SUSTAIN:
        if (likely(envelope_counter != sustain_level[sustain])) {
          --envelope_counter;
        }
        break;
      case RELEASE:
        // The envelope counter can flip from 0x00 to 0xff by changing state to
        // attack, then to release. The envelope counter will then continue
        // counting down in the release state.
        // This has been verified by sampling ENV3.
        // NB! The operation below requires two's complement integer.
        //
        --envelope_counter &= 0xff;
        break;
      case FREEZED:
        // we should never get here
        break;
      }

      // Check for change of exponential counter period.
      set_exponential_counter();
      if (unlikely(new_exponential_counter_period > 0)) {
        exponential_counter_period = new_exponential_counter_period;
        new_exponential_counter_period = 0;
        if (next_state == FREEZED) {
          hold_zero = true;
        }
      }
    }

    rate_step = rate_period;
  }
}

/**
 * This is what happens on chip during state switching,
 * based on die reverse engineering and transistor level
 * emulation.
 *
 * Attack
 *
 *  0 - Gate on
 *  1 - Counting direction changes
 *      During this cycle the decay rate is "accidentally" activated
 *  2 - Counter is being inverted
 *      Now the attack rate is correctly activated
 *      Counter is enabled
 *  3 - Counter will be counting upward from now on
 *
 * Decay
 *
 *  0 - Counter == $ff
 *  1 - Counting direction changes
 *      The attack state is still active
 *  2 - Counter is being inverted
 *      During this cycle the decay state is activated
 *  3 - Counter will be counting downward from now on
 *
 * Release
 *
 *  0 - Gate off
 *  1 - During this cycle the release state is activated if coming from sustain/decay
 * *2 - Counter is being inverted, the release state is activated
 * *3 - Counter will be counting downward from now on
 *
 *  (* only if coming directly from Attack state)
 *
 * Freeze
 *
 *  0 - Counter == $00
 *  1 - Nothing
 *  2 - Counter is disabled
 */
RESID_INLINE
void EnvelopeGenerator::state_change()
{
  state_pipeline--;

  switch (next_state) {
    case ATTACK:
      if (state_pipeline == 0) {
        state = ATTACK;
        // The attack register is correctly activated during second cycle of attack phase
        rate_period = rate_counter_period[attack];
        hold_zero = false;
      }
      break;
    case DECAY_SUSTAIN:
      break;
    case RELEASE:
      if (((state == ATTACK) && (state_pipeline == 0))
          || ((state == DECAY_SUSTAIN) && (state_pipeline == 1))) {
        state = RELEASE;
        rate_period = rate_counter_period[release];
      }
      break;
    case FREEZED:
     break;
  }
}


// ----------------------------------------------------------------------------
// Read the envelope generator output.
// ----------------------------------------------------------------------------
RESID_INLINE
short EnvelopeGenerator::output()
{
  // DAC imperfections are emulated by using envelope_counter as an index
  // into a DAC lookup table. readENV() uses envelope_counter directly.
  return model_dac[sid_model][envelope_counter];
}

RESID_INLINE
void EnvelopeGenerator::set_exponential_counter()
{
  // Check for change of exponential counter period.
  switch (envelope_counter) {
  case 0xff:
    exponential_counter_period = 1;
    break;
  case 0x5d:
    exponential_counter_period = 2;
    break;
  case 0x36:
    exponential_counter_period = 4;
    break;
  case 0x1a:
    exponential_counter_period = 8;
    break;
  case 0x0e:
    exponential_counter_period = 16;
    break;
  case 0x06:
    exponential_counter_period = 30;
    break;
  case 0x00:
    // TODO write a test to verify that 0x00 really changes the period
    // e.g. set R = 0xf, gate on to 0x06, gate off to 0x00, gate on to 0x04,
    // gate off, sample.
    exponential_counter_period = 1;

    // When the envelope counter is changed to zero, it is frozen at zero.
    // This has been verified by sampling ENV3.
    hold_zero = true;
    break;
  }
}

#endif // RESID_INLINING || defined(RESID_ENVELOPE_CC)

} // namespace reSID

#endif // not RESID_ENVELOPE_H