/****************************************************************************
** Copyright (C) 2001-2013 RibbonSoft, GmbH. All rights reserved.
**
** This file is part of the dxflib project.
**
** This file is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
** Licensees holding valid dxflib Professional Edition licenses may use
** this file in accordance with the dxflib Commercial License
** Agreement provided with the Software.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.ribbonsoft.com for further details.
**
** Contact info@ribbonsoft.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/

#ifndef DL_CREATIONINTERFACE_H
#define DL_CREATIONINTERFACE_H

#include "dl_global.h"

#include <string.h>

#include "dl_attributes.h"
#include "dl_codes.h"
#include "dl_entities.h"
#include "dl_extrusion.h"

/**
 * Abstract class (interface) for the creation of new entities.
 * Inherit your class which takes care of the entities in the
 * processed DXF file from this interface.
 *
 * Double arrays passed to your implementation contain 3 double
 * values for x, y, z coordinates unless stated differently.
 *
 * @author Andrew Mustun
 */
class DXFLIB_EXPORT DL_CreationInterface
{
public:
    DL_CreationInterface()
    {
        extrusion = new DL_Extrusion;
    }

    virtual ~DL_CreationInterface()
    {
        delete extrusion;
    }

    /**
     * Called for every code / value tuple of the DXF file. The complete DXF file
     * contents can be handled by the implemetation of this function.
     */
    virtual void processCodeValuePair( unsigned int groupCode, const std::string& groupValue ) = 0;

    /**
     * Called when a section (entity, table entry, etc.) is finished.
     */
    virtual void endSection() = 0;

    /**
     * Called for every layer.
     */
    virtual void addLayer( const DL_LayerData& data ) = 0;

    /**
     * Called for every linetype.
     */
    virtual void addLinetype( const DL_LinetypeData& data ) = 0;

    /**
     * Called for every dash in linetype pattern
     */
    virtual void addLinetypeDash( double length ) = 0;

    /**
     * Called for every block. Note: all entities added after this
     * command go into this block until endBlock() is called.
     *
     * @see endBlock()
     */
    virtual void addBlock( const DL_BlockData& data ) = 0;

    /** Called to end the current block */
    virtual void endBlock() = 0;

    /** Called for every text style */
    virtual void addTextStyle( const DL_StyleData& data ) = 0;

    /** Called for every point */
    virtual void addPoint( const DL_PointData& data ) = 0;

    /** Called for every line */
    virtual void addLine( const DL_LineData& data ) = 0;

    /** Called for every xline */
    virtual void addXLine( const DL_XLineData& data ) = 0;

    /** Called for every ray */
    virtual void addRay( const DL_RayData& data ) = 0;

    /** Called for every arc */
    virtual void addArc( const DL_ArcData& data ) = 0;

    /** Called for every circle */
    virtual void addCircle( const DL_CircleData& data ) = 0;

    /** Called for every ellipse */
    virtual void addEllipse( const DL_EllipseData& data ) = 0;

    /** Called for every polyline start */
    virtual void addPolyline( const DL_PolylineData& data ) = 0;

    /** Called for every polyline vertex */
    virtual void addVertex( const DL_VertexData& data ) = 0;

    /** Called for every spline */
    virtual void addSpline( const DL_SplineData& data ) = 0;

    /** Called for every spline control point */
    virtual void addControlPoint( const DL_ControlPointData& data ) = 0;

    /** Called for every spline fit point */
    virtual void addFitPoint( const DL_FitPointData& data ) = 0;

    /** Called for every spline knot value */
    virtual void addKnot( const DL_KnotData& data ) = 0;

    /** Called for every insert. */
    virtual void addInsert( const DL_InsertData& data ) = 0;

    /** Called for every trace start */
    virtual void addTrace( const DL_TraceData& data ) = 0;

    /** Called for every 3dface start */
    virtual void add3dFace( const DL_3dFaceData& data ) = 0;

    /** Called for every solid start */
    virtual void addSolid( const DL_SolidData& data ) = 0;


    /** Called for every multi Text entity. */
    virtual void addMText( const DL_MTextData& data ) = 0;

    /**
     * Called for additional text chunks for MTEXT entities.
     * The chunks come at 250 character in size each. Note that
     * those chunks come <b>before</b> the actual MTEXT entity.
     */
    virtual void addMTextChunk( const std::string& text ) = 0;

    /** Called for every text entity. */
    virtual void addText( const DL_TextData& data ) = 0;

    /** Called for every arc aligned text entity. */
    virtual void addArcAlignedText( const DL_ArcAlignedTextData& data ) = 0;

    /** Called for every block Attribute entity. */
    virtual void addAttribute( const DL_AttributeData& data ) = 0;

    /**
     * Called for every aligned dimension entity.
     */
    virtual void addDimAlign( const DL_DimensionData& data,
            const DL_DimAlignedData& edata ) = 0;

    /**
     * Called for every linear or rotated dimension entity.
     */
    virtual void addDimLinear( const DL_DimensionData& data,
            const DL_DimLinearData& edata ) = 0;

    /**
     * Called for every radial dimension entity.
     */
    virtual void addDimRadial( const DL_DimensionData& data,
            const DL_DimRadialData& edata ) = 0;

    /**
     * Called for every diametric dimension entity.
     */
    virtual void addDimDiametric( const DL_DimensionData& data,
            const DL_DimDiametricData& edata ) = 0;

    /**
     * Called for every angular dimension (2 lines version) entity.
     */
    virtual void addDimAngular( const DL_DimensionData& data,
            const DL_DimAngular2LData& edata ) = 0;

    /**
     * Called for every angular dimension (3 points version) entity.
     */
    virtual void addDimAngular3P( const DL_DimensionData& data,
            const DL_DimAngular3PData& edata ) = 0;

    /**
     * Called for every ordinate dimension entity.
     */
    virtual void addDimOrdinate( const DL_DimensionData& data,
            const DL_DimOrdinateData& edata ) = 0;

    /**
     * Called for every leader start.
     */
    virtual void addLeader( const DL_LeaderData& data ) = 0;

    /**
     * Called for every leader vertex
     */
    virtual void addLeaderVertex( const DL_LeaderVertexData& data ) = 0;

    /**
     * Called for every hatch entity.
     */
    virtual void addHatch( const DL_HatchData& data ) = 0;

    /**
     * Called for every image entity.
     */
    virtual void addImage( const DL_ImageData& data ) = 0;

    /**
     * Called for every image definition.
     */
    virtual void linkImage( const DL_ImageDefData& data ) = 0;

    /**
     * Called for every hatch loop.
     */
    virtual void addHatchLoop( const DL_HatchLoopData& data ) = 0;

    /**
     * Called for every hatch edge entity.
     */
    virtual void addHatchEdge( const DL_HatchEdgeData& data ) = 0;

    /**
     * Called for every XRecord with the given handle.
     */
    virtual void addXRecord( const std::string& handle ) = 0;

    /**
     * Called for XRecords of type string.
     */
    virtual void addXRecordString( int code, const std::string& value ) = 0;

    /**
     * Called for XRecords of type double.
     */
    virtual void addXRecordReal( int code, double value ) = 0;

    /**
     * Called for XRecords of type int.
     */
    virtual void addXRecordInt( int code, int value ) = 0;

    /**
     * Called for XRecords of type bool.
     */
    virtual void addXRecordBool( int code, bool value ) = 0;

    /**
     * Called for every beginning of an XData section of the given application.
     */
    virtual void addXDataApp( const std::string& appId ) = 0;

    /**
     * Called for XData tuples.
     */
    virtual void addXDataString( int code, const std::string& value ) = 0;

    /**
     * Called for XData tuples.
     */
    virtual void addXDataReal( int code, double value ) = 0;

    /**
     * Called for XData tuples.
     */
    virtual void addXDataInt( int code, int value ) = 0;

    /**
     * Called for dictionary objects.
     */
    virtual void addDictionary( const DL_DictionaryData& data ) = 0;

    /**
     * Called for dictionary entries.
     */
    virtual void addDictionaryEntry( const DL_DictionaryEntryData& data ) = 0;

    /**
     * Called after an entity has been completed.
     */
    virtual void endEntity() = 0;

    /**
     * Called for every comment in the DXF file (code 999).
     */
    virtual void addComment( const std::string& comment ) = 0;

    /**
     * Called for every vector variable in the DXF file (e.g. "$EXTMIN").
     */
    virtual void setVariableVector( const std::string& key,
            double v1,
            double v2,
            double v3,
            int code ) = 0;

    /**
     * Called for every string variable in the DXF file (e.g. "$ACADVER").
     */
    virtual void setVariableString( const std::string& key, const std::string& value,
            int code ) = 0;

    /**
     * Called for every int variable in the DXF file (e.g. "$ACADMAINTVER").
     */
    virtual void setVariableInt( const std::string& key, int value, int code ) = 0;

    /**
     * Called for every double variable in the DXF file (e.g. "$DIMEXO").
     */
    virtual void setVariableDouble( const std::string& key, double value, int code ) = 0;

#ifdef DL_COMPAT
    virtual void setVariableVector( const char* key, double v1, double v2, double v3,
            int code ) = 0;
    virtual void    setVariableString( const char* key, const char* value, int code ) = 0;
    virtual void    setVariableInt( const char* key, int value, int code ) = 0;
    virtual void    setVariableDouble( const char* key, double value, int code ) = 0;
    virtual void    processCodeValuePair( unsigned int groupCode, char* groupValue ) = 0;
    virtual void    addComment( const char* comment ) = 0;
    virtual void    addMTextChunk( const char* text ) = 0;

#endif

    /**
     * Called when a SEQEND occurs (when a POLYLINE or ATTRIB is done)
     */
    virtual void endSequence() = 0;

    /** Sets the current attributes for entities. */
    void setAttributes( const DL_Attributes& attrib )
    {
        attributes = attrib;
    }

    /** @return the current attributes used for new entities. */
    DL_Attributes getAttributes()
    {
        return attributes;
    }

    /** Sets the current attributes for entities. */
    void setExtrusion( double dx, double dy, double dz, double elevation )
    {
        extrusion->setDirection( dx, dy, dz );
        extrusion->setElevation( elevation );
    }

    /** @return the current attributes used for new entities. */
    DL_Extrusion* getExtrusion()
    {
        return extrusion;
    }

protected:
    DL_Attributes attributes;
    DL_Extrusion* extrusion;
};

#endif